Type | EA20 | EA50 | EA100 | EA200 | EA400 | EA600 | EA1000 | EA1500 | EA2000 | |
Characteristics | ||||||||||
Output torque | 20NM | 50NM | 100NM | 200NM | 400NM | 600NM | 1000NM | 1500NM | 2000NM | |
Action time(S) | 10/20 |
4/10 20/60 |
4/7 15/30/60 |
6/15 30/60 |
6/15 30/60 |
45 | 15/30 | 48 | 60/75 | |
Gyration angle |
0-90° 0-360° |
0-90° 0-360° |
0-90° 0-360° |
0-90° | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° | |
Motor power (W) |
AC220V | 6 | 10 | 25 | 40 | 90 | 90 | 120 | 140 | 140 |
AC380V | ------- | 6 | 15 | 30 | 40 | 40 | 90 | 100 | -------- | |
DC24V | 8 | 13 | 25 | 35 | 70 | 70 | --------- | --------- | ---------- | |
Rated current(A) | AC220V | 0.16 | 0.16 | 0.32 | 0.35 | 0.54 | 0.64 | 0.96 | 0.98 | 1.03 |
AC380V | --------- | 0.07 | 0.1 | 0.15 | 0.29 | 0.29 | 0.45 | 0.46 | --------- | |
DC24V | 0.7 | 1.28 | 2.03 | 3.57 | 5.13 | 3.04 | --------- | -------- | -------- | |
Weight(Kg) | 1.2 | 2.5 | 3.5 | 8 | 8.5 | 9 | 17 | 18 | 20 | |
For ball valve | DN15-25 | DN15-40 |
DN50- 65 |
DN80- 125 |
DN125-200 |
DN200- 300 |
-------- | -------- | --------- | |
For butterfly valve | DN32-40 | DN50-80 |
DN80- 125 |
DN150- 200 |
DN200-300 |
DN300- 450 |
DN400- 500 |
DN500- 600 |
DN600- 800 |
|
Power | AC 220V±10% 50HZ/60HZ, AC 380V±10% 50HZ/60HZ, DC24V | |||||||||
Insulation resistance | 100MΩ/500VDC | |||||||||
Anti-pressure level | 1500VAC 1Min | |||||||||
Protection level | IP67(It is no leakage in water about 20 meters deep) | |||||||||
Limited component |
Power-driven: Fully open and close, limit switch. Manual: Mechanical stopper. |
|||||||||
Protector | Overheat protector(self-recovery) | |||||||||
Installation position | Any direction from 0 to 360 degree | |||||||||
Electrical connection | M20*1.5 Waterproof cable connection, power wire, signal wire | |||||||||
Ambient Temp. | -30ºC--60ºC |
Leading manufacturer of industrial automation equipment