GRAT Control Valve、ELECTRIC ACTUATOR、ELECTRIC BUTTERFLY VALVE、ELECTRIC BALL VALVE、ELECTRIC CONTROL VALVE

Electric control valve

HOME > Product Category > Electric control valve >

Category : Electric control valve

Product Name: Electronic Control Ball Valve

Product introduction:

Electronic Control Ball Valve is suitable for various industrial automation computer control system ,DCS system and gauges mainly applications are industrial automation production process control fields. It configured with the intelligent actuator which can make the precise control receives the 4-20 MA or 1-5 VDC signal from high precision electric actuators and indicates the angle of direct instruction and feedback.

  *Accurate and repeatable position control and feedback signal using 4-20 mA signal withup to 0.3% accuracy
  *More than 100,000 times operation test passed without fault
  *Powered by 1-phase, 3-phase or DC power supplies
  *Digital communication options including HART® Mod-bus® available
  *Permanently lubricated and maintenance free drive train
  *Dust-proof and Watertight to IP67
  *Self-recovery overheat protector
  *Optional torque limiter/remote control/dehumidify heater
  *Field selectable adjustments for :
Zero and span
Command signal type
Standard or reverse acting
Manual-auto operation
Output shaft position return on loss of signal

The V-notch cut in disc can rotate reversely & correspondingly with metal seal to produce shear force to cut off fibre and prevent the block. This valve is special suitable for mud and fibrous media and suspended solids containing minimal media.

PRODUCT CHARACTERISTICS

The advantage of electric actuator

Product parameters

Nominal diameter	DN15-DN200（Please contact for bigger size）
Nominal pressure	PN1.6MPa
Connection type	Flange
Valve seat	PTFE soft seal
Action time	15s、30s（Optional）（0-90°）
Supply power	AC220V		AC380V	DC24V
Control signal	4～20mA		0-5V
Output signal	4～20mA		0-5V
Fluid temp.	≤220℃
Ambient temp.	≤50℃
Suitable fluid	Food, Grease, Fibrous fluids, Pulp, Coral pulp, Water, Oil, Gas
Deadband	0.3%～3.0% Adjustable
Body material	WCB	SS304	SS316	SS316L
Valve seat material	SS304		SS316	SS316L
Disc material	SS304		SS316	SS316L

Product information

Installation size drawing

CNS Standard size
Design standard：GB/T12237-2007
Flange standard：GB/T9113-2010 Unit：（mm）

Nominal diameter (mm) (inch)		d	D1	K	D	n-Md	f	L	H	W
DN15	1/2〃	15	45	65	95	4-M12	2	35	210	196
DN20	3/4〃	19	55	75	105	4-M12	2	38	216	196
DN25	1〃	25	65	85	115	4-M12	2	50	223	196
DN32	1-1/4〃	28	76	100	140	4-M12	2	50	230	196
DN40	1-1/2〃	38	83	110	148	4-M16	3	67	240	196
DN50	2〃	49	102	125	156	4-M16	3	72	250	196
DN65	2-1/2〃	64	120	145	185	4-M16	3	94	298	255
DN80	3〃	73	143	160	200	8-M16	3	120	312	255
DN100	4〃	90	168	180	220	8-M16	3	141	322	255
DN125	5〃	110	185	210	245	8-M16	3	165	397	255
DN150	6〃	145	208	240	277	8-M20	3	225	422	255
DN200	8〃	195	265	395	335	12-M20	3	275	512	255

DIN Standard size
Design standard：DIN3375/1，2，EN12516-1
Flange standard：DIN EN1092-1 PN10-PN40 Unit：（mm）

Nominal diameter (mm) (inch)		d	D1	K	D	n-Md	f	L	H	W
DN15	1/2〃	15	45	65	95	4-M12	2	44	220	196
DN20	3/4〃	20	58	75	105	4-M12	2	44	220	196
DN25	1〃	25	68	85	115	4-M12	2	50	223	196
DN32	1-1/4〃	32	78	100	140	4-M16	2	60	237	196
DN40	1-1/2〃	38	88	110	150	4-M16	3	65	244	196
DN50	2〃	49	102	125	165	4-M16	3	80	245	196
DN65	2-1/2〃	62	122	145	185	4-M16	3	110	306	255
DN80	3〃	74	138	160	200	8-M16	3	120	326	255
DN100	4〃	100	158	180	220	8-M16	3	152	338	255
DN125	5〃	118	188	210	250	8-M16	3	180	363	255
DN150	6〃	150	212	240	285	8-M20	3	232	396.5	255

Typical section shape and flow characteristics

The implementation standards

Manufacturing standards	GB/T 122387-89
Flange standards	GB9113-2000、GB17241.6-1998
Structure length standards	GB12221-89
Inspection standards	GB/T 13927-92

Control diagram

PRODUCT LIST

Download & Catalog

CONTACT US

VIDEO

APPLICATION